Water cooling process is an important process equipment for on-line heat treatment of high speed wire rolling to ensure product surface quality and internal physical properties. The efficient water-cooled nozzle turbulence tube type cools the red steel by introducing water into the tube from the water inlet under the nozzle seat. The middle tube is arranged with a catheter and a catheter, and the arrangement of a catheter and a catheter in the middle tube is arranged in sequence for a catheter two, a catheter one, a catheter one and a catheter two. An outlet duct is arranged on the left side of the middle tube, and the outlet duct is close to the middle tube. A nozzle seat is arranged on the left side of the outlet duct, and an entrance guide is arranged on the inside of the nozzle seat. In the cooling process, the hot gas diaphragm is generated between the rolled part and the cooling water due to the action of hot steam, and the production of the gas film leads to the cooling water can not fully cool the rolled part, resulting in the cooling effect of the rolled part per unit time is not good, and the heat exchange capacity is reduced. Our company uses the nozzle with spiral water channel or internal multi-layer water channel to promote the cooling water to form a vortex state, break through the hot gas diaphragm, overcome the uneven cooling phenomenon (temperature deviation), improve the heat exchange capacity per unit time, improve the external quality and internal mechanical properties of the product.
Where to buy Turbulence tube for high-speed water cooler?
If you have any questions about Turbulence tube for high-speed water cooler, please don't hesitate to contact us at any time. We will provide detailed information and technical support about the features, specifications, solutions and customization options. Welcome you to visit our factory!
